There are so many one tube radio in the website but they use old tubes like 1T4. I intend to experiment with a commonly found tube like the 12au, ax,at twin triode to make a simple rfegen MW radio using the ferrite bar coil of an AM radio and the PVC varicap commonly available. Then put an IC audio amp. It should be possible using 12 volts DC. Perhaps a kit.

Comments

Post a Comment

Popular posts from this blog

A coil with a capacitor across it is called a tank and is tuned to a certain frequency. Armstrong fed the signal from such coil into the grid of a triode to amplify it. He discovered that by feeding some of the amplified signal back into the grid, regeneration occurred, making the signal even loader. His invention got a worldwide recognition and this was called the REGENERATIVE RADIO OR REGEN for short.
Read more
The problem with the Regen radio was that it was fidgety and lacked selectivity. The next type of tube radio then was called the TRF for Tuned radio frequency. The idea was a series of amplifiers each with a tuning coil. There were just too many tuners! But it can fine tune to a station. It was still figedty to the taste and something has to be developed to make a USER FRIENDLY radio. Armstgrong went back to the drawing board. He knew the principle that frequencies can be MIXED. His goal was go reduce the number of tuning condensers. Finally, he invented the SUPERHETERODYNE radio when a local oscillator is mixed with the incoming signal. The tuning capacitors of the antenna coil and the oscillator coil were ganged. The differential frequency was kept constant at 455 Khz. The next amplifier as tightly tuned to 455 Khz. Till today, this principle is still used. Superhets spread all over the world and in the U.S.A., the most common was a five tube set up. It was called the All American...
Read more