Comments

Post a Comment

Popular posts from this blog

3/1/20 Hi tube enthusiasts interested in RF with tubes. A brief: -Edison invented the light bulb. -Fleming of UK imported Edison's bulbs. -Fleming played with a bulb and placed a second element inside. -Using batteries, he discovered electrons moved inside the bulb. Eureka! The DIODE! -Back in the U.S.A., a third element was discovered to control the flow of huge electrons with TINY currents. EUREKA! THE TRIODE. It was originally called the AUDION. So, it is CATHODE,GRID,PLATE. -Electrons moved fast inside the tube, i.e. at high voltage, 45 volts upwards. Armstrong, American, was first to experiment RF in a tube. He used the basic t riode as an RF amplifier. He invented the REGENERATIVE RECEIVER.
Read more
For quite sometime, octal tubes was standard until the minis came out, the 7 pin tubes, then of course the 9 pin tubes. The 6SA7, 6SK7, 6AQ7 and the power amp were replaced by the minis 6BE6,BA6,AV6, an the 50C5. If you have the RCA tube manual, they no longer show the octal version. Now, if we analyze the circuit, we actually do a hybrid and eliminate the power amp and use an IC amp. Secondly, we will not need the pre amp in the AQ6 since the IC amp is sensitive enough. If not, a tranny will boost the signal. /Thirdly, we do not need a tube diode. A 1n34 will work. I have done this. And the best news is that we won't need the recgifier tube as the RF tubes can work on even 12 volts as well as the IC. WHAT IT MEANS WE ONLY NEED THE FIRST 2 TUBES! If you have the octals, nice and nostalgic. If none the BE6 and the BA6 will do. 6 olt or 12 volt filament will be ok. If we need to raise the B+, we can do a voltage doubler. A 1 amp main traffo will do. 12 V will have the advantage...
Read more